Closing Machines which use a Closure
- Screw Capping Machine
- A closing machine which applies a threaded cap or lid, usually to a rigid container.
- Steam Capping Machine
- A closing machine which sterilises the cap and filled rigid container with steam during the closing process.
- Plugging; Corking Machine
- A closing machine which pushes a plug or cork into the mouth of a rigid container.
- Press-on Lidding Machine
- A closing machine which pushes a lid, usually metal, plastic or other material, on to a rigid container.
- Crown Capping Machine
- A closing machine which places a pre-formed metal cap over the mouth of a rigid container, before crimping the edges of the cap to secure it to the container.
- Roll-on Capping Machine
- A closing machine which places a deformable capsule over the mouth of a rigid container, before rolling the capsule to form a thread and secure the capsule to the container.
- Can Seaming Machine
- A closing machine which places a pre-formed lid onto the mouth of a can, before rolling the edges of the lid and can together to form a seal.
- Cork Wiring Machine
- A closing machine which applies a wire cage to the neck and cork of a rigid container, to prevent the cork being pushed out by gas pressure in the container.
- Aerosol Valve Closing Machine
- A closing machine which places an aerosol valve into the mouth of a rigid container before seaming the valve to the container.
- Pump Applicator
- A closing machine which places a dispensing pump into the mouth of a rigid container before attaching the pump to the container.